I remember well, changing the ttsystem, in this case full navcore generates a new ttgo.bif and this is re-patch the map, either a new one or even the one you were using (this can confirm or deny a teacher or moderator). How to update navcore and maps for tomtom. Here you have all files you need to update the navcore and map on your device. How to patch original navcore. 1 Patch ttsystem navcore 9 >>> Patch ttsystem navcore 9 Patch ttsystem navcore 9 You may have to before you can post: click the register link above to proceed.

These maps have less additional information (POI's, rivers, etc) included to make them fit in 1GB or 2GB flash. The actual roads are the same. If you want: to use an SD Card, to preserve your Favorites or if you wonder what ALG, ASR, and C-Speech mean: see the post Do not copy a new map over an old one; remove the old map first. Each map resides in its own directory.

Thanks for your reply tendriver! So I first install the exe (no space on the drive so I have to remove the old map).if the.meta.dct file is in the folder everything is fine.otherwise I have I have to patch the navcore with your suggested file.right? Thanks again!! Offline Joined: Tue Dec 11, 2012 3:01 pm Posts: 4 Location: Italy Has thanked: 0 time Been thanked: 0 time. Tendriver wrote:Make a backup of your current setup by copy & pasting it to your desktop. If you have room on your unit, just run the exe. If you don't have room, remove the old map folder, before you run the exe.

So what am I doing wrong? Offline Joined: Thu Apr 11, 2013 8:31 pm Posts: 1 Has thanked: 0 time Been thanked: 0 time. Darkebie wrote:I followed the instructions but doesn't seem to work; Automatic Installer & Patcher Instructions: Maps with “Automatic Installer & Patcher” are a Navitotal Exclusive Product. [size=100]Before you begin back up your SD card. The only file you need on your SD card is a copy of your device's ttgo.bif and ttsystem file.[/size] You just need to download and run the file on your computer. With your TomTom device plugged in or your sd card in your sd reader and an active internet connection 2. Click on the.exe file [Choose TomTom path or sd path] and click on the [Install] button.

Hope some one can help:smile. Hi FoxLady, thanks for your tutorial:righton: I applied it to my (old and obsoleted by Tomtom) GO510 to install Europe-181 on a new SD 2GB card. In fact, it is Europe 855_2885 from which I discarded non Frecnh languages to decrease the size under 2GB. I copied in the 'navcore_7.903.9183.go510-go710' (ultimate version for my GPS). BTW, it becomes a '710'?!? All goes perfectly except that I got, in French, 'Carte introuvable' (i.e.: can't find the map) when I switch the GO510 on, at the first and the final steps of your tuto. What did I miss?

A map of Western Europe will be in a directory Western_Europe in the root of your TT (or the SD card). Do not place a map-directory inside another directory. Speedcams and POI's go inside the map-directory. Some more details: 4 - Generate a Key A map will only work on your TT if you have a valid key that matches your TT hardware. Get a map, you are going generate a key for it. Generating a key takes some effort. I will explain what needs to be done.

Language English uk, right handed, miles or kilometres, voice etc. Once you confirm this you should now get RED screen stating the words ' You cannot use this map on this device' Now turn off tomtom, connect sd card to pc or the tomtom via usb cable if no sd slot, then turn back on again, the tomtom will now have created a TTGO.Bif file in your tomtom. So now you have successfully installed both Navcore and Maps for the tomtom, now we need to patch them in order for them to work. Now go back into the drive letter which is your tomtom/tomtom files and you will notice the ttgo.bif file here, right click and open in notepad, at top you will see device id with 10 digit number, right click on this number and copy, then close off ttgo notepad window. Ok now go to the Easytools rar file and extract the folder to the desktop, Now double click that folder and you will see this Now you can see a file called Device ID in the easytools folder Double click to open it and right click and paste that 10 digit number you copied from the TTGO file, click close on the box and it will ask for changes, click SAVE Now go into the tomtom a double click on the MAP folder, at the bottom you will see 2 files which are needed, ending in.meta &.pna.

Yes, if you haven't already done so. The ttsystem file in patches the navcore. The Please read first.txt explains what to do with the model.txt. Offline Joined: Thu May 20, 2010 4:43 pm Posts: 12980 Has thanked: times Been thanked: times. • Related topics Replies Views Last post • by » Wed Dec 23, 2015 6:16 am 7 Replies 2681 Views Last post by Sat Jul 02, 2016 4:58 am • by » Fri Nov 24, 2017 3:38 am 1 Replies 846 Views Last post by Fri Nov 24, 2017 8:18 am • by » Mon Jun 17, 2013 5:33 pm 3 Replies 3545 Views Last post by Sat Jul 06, 2013 4:44 pm • by » Fri Jan 02, 2015 11:50 pm 5 Replies 5217 Views Last post by Mon Jan 05, 2015 11:11 pm • by » Sat Aug 31, 2013 5:13 pm 2 Replies 2568 Views Last post by Sat Aug 31, 2013 7:49 pm Who is online Users browsing this forum: No registered users and 2 guests.

Not sure what you mean by 'rotated screen, cut in half'. Have you checked Main Menu, Change preferences, Status bar preferences' Please explain 'i cant do anything with my poi's, speed cameras'. Offline Joined: Thu May 20, 2010 4:43 pm Posts: 12980 Has thanked: times Been thanked: times. Tendriver wrote:Not sure what you mean by 'rotated screen, cut in half'. Have you checked Main Menu, Change preferences, Status bar preferences' Please explain 'i cant do anything with my poi's, speed cameras'. Ok, screen instead of horizntal, apears vertical (sideways) on the left side of the screen.

Well, finally got down to it as i never done one, so i have provided a noob way and hopes it helps others. A tutorial how to put navcore, maps and patch them with easytools OK let's start and get you doing you maps and patching for 1st time. First of all you will 3 things, NAVCORE (Tomtom Operating System) in my case my navore i use for my ONE devices is v8.204 as seen on my desktop, MAPS (We know what these are) & Easytools (Your Patching tool in order to make the maps work) So you have downloaded the above mentioned, Place all the winrar files you downloaded on your desktop so everything nice and neat and no confusion later on.

You are welcome to post a question, including 'newbie' and 'trivial' questions, but check that: * you use the appropriate (sub-)forum and/or thread * the question has a descriptive title * the question is detailed and specific * is written clear and simple * includes details of importance, e.g. Model: Go720 serial: M6****G***** (these 3 characters only!) navcore: 8.351 (9982), patched with EasyUseTools bootloader: 5.5128 map: Western Europe 830.2306, keygenned with EasyUseTools * does NOT include DeviceID or full TT SerialNumber * you report back successes (failures tend to come back like a racquetball) What are we going to do? 1 Update the software (navcore) on your TT 2 Modify the new navcore to accept a new map (patching) 3 Find a new map, suitable for your TT 4 Make the new map accepted by your TT system (generate a key) All tools, instructions, and maps on this forum are provided by kind experts and donators. Please give them credit and be nice.

You now have a TT with the latest official navcore and with its original map. Functionality and the colour scheme may have changed.

This is a general instruction for updating your TT. It is dedicated to users who are inexperienced in updating their TT, but are computer literate. You must know how to download, unpack various archives using WinRAR, and ideally run a program from the command line. Some packages are distributed using the program jDownloader or CryptLoad to ensure long-time availability of the download. These packages are distributed via a.dlc file.

With tools RunMeforMetaKey returns; can't find *.pna cline.dat - not present cname.dat - not present cnode.dat - not present mapinfo.dat - not present can't find g: voices *.meta file data05.chk - present data05.vif - present Fault in ReadFromMeta file g: voices data05.chk data05.chk - Bad data04.chk - present data04.vif - present Fault in ReadFromMeta file g: voices data04.chk data04.chk - Bad wrong version select? I take it these are the 2 voices I installed from TTHome when installing the Navcore - not that important but the device says 'No maps found' - last did this a couple of years ago, don't remember it being this hard!

Navcore v9 has the same information in the menu-system, last page. This page provides all essential information when asking for help.

So I first install the exe (no space on the drive so I have to remove the old map).if the.meta.dct file is in the folder everything is fine.otherwise I have I have to patch the navcore with your suggested file.right? Thanks again!! Offline Joined: Tue Dec 11, 2012 3:01 pm Posts: 4 Location: Italy Has thanked: 0 time Been thanked: 0 time. Tendriver wrote:Make a backup of your current setup by copy & pasting it to your desktop. If you have room on your unit, just run the exe. If you don't have room, remove the old map folder, before you run the exe.

I followed the instructions but doesn't seem to work; Automatic Installer & Patcher Instructions: Maps with “Automatic Installer & Patcher” are a Navitotal Exclusive Product. Before you begin back up your SD card. The only file you need on your SD card is a copy of your device's ttgo.bif and ttsystem file.

If you don't have room, remove the old map folder, before you run the exe. After you run the exe, a.meta.dct file in the map folder confirms that the map is correctly patched. You can use to patch the navcore, if needed. Offline Joined: Thu May 20, 2010 4:43 pm Posts: 12980 Has thanked: times Been thanked: times.

200 86% Leading this Week Pts Helpful 1. 200 100% Leading this Month Pts Helpful 1. Adobe photoshop cs 8 authorization code generator. Leader Board Leading Today Pts Helpful 1.

The Exe is ok! Now in my map folder the only meta I can see is Central_Europe-781.meta. So I guess I need to patch the navcore. I downloaded your suggested file.in the rar I see two txt and ttsystem.how do I go ahead?? Thanks a lot and sorry for bothering you with idiot questions! Your map is not patched. Put FastActivate & a copy of your ttgo.bif file in the new map folder & run FA Option 2.

After you run the exe, a.meta.dct file in the map folder confirms that the map is correctly patched. You can use 9.510 SE ttsystem.rar to patch the navcore, if needed. Thanks a lot for your help tendriver! So.after the exe finished the installation.if the.meta.dct is in everything is fine and it works.if it is not in I patch with your suggested software.right? Thanks again! Offline Joined: Tue Dec 11, 2012 3:01 pm Posts: 4 Location: Italy Has thanked: 0 time Been thanked: 0 time.

> > How to update navcore and maps for tomtom User Name Remember Me? Hey there, I have tomtom one xl dont know the version. Looking at the files within the United_Kingdom_and_Republic_of_Ireland folder, it seems like the map is from 2009 and it doesnt show some roads. I have used tomtom home to update the tomtom and that tomtom home said that the device needs a new updated map which costs £44. Using this forum i found you have the same maps for free but when i replace the new 2010 map on top of the old map.

The version is after ApplicationVersionVersionNumber= HOME can also report the system version. You can check the website for the latest version, status and fixes: You can also check the overview in here If you want to know which TT-model you have: Update your system using HOME. Latest HOME: But be aware of some TTHome restrictions Make sure your battery is fully loaded before you start. Keep your TT on the cradle while updating. Do a soft-reset (consult this forum, the website or your manual): It should run fine now.

Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please -! If you have any problems with the registration process or your account login, please contact. > > How to update navcore and maps for tomtom User Name Remember Me?

Download game (4.01 MB) Order full version. Little Bombers Returns is a game about adventures of little brave bombers. Free arcade games| Free action games. BomberMan games You play from one up to four of little bombers. Little Bombers Returns Latest Version! Free Little Bombers Returns download for PC. Little bombers returns game full version free download. Download Little Bombers Returns for free. Little Bombers Returns is a remake of the famous Dyna Blaster/BomberMan games.

Thanks beforehand. Need urgent help to update maps on Go530 Hi Everyone I am new here on Tomtom, I have tomtom go 530 with the following dtails Device AK7AA 8AH9S App 9.430.890926.1. OS 842337 (2008, ) 64MB RAM (free 12.9MB) GPS V1.20, Boot 5.5120 Map: 'United_Kingdom_and_Republic_of_Ireland' v805.1801 Language: English UK I bought this device in 2008 and then updated the maps, Now I can not afford to update to latest maps. I know the latest maps available on tomtom website is V9.05. As I am new I will really appreciate if someone could help me with step by step to install latest maps on my Go 530 please. I know I am being cheeky and asking for too much but I will really appreciate your help.

If the Meta.txt it is out-of-date (due to new maps): TTuser frequently updates the EasyUseTools, and Albert's tool has special functionality in his tool to get the latest meta-data (thank you Guys). A last resort: Add new meta-data yourself. 3 the identifier of your TT (device id), to be found on the first line of the page of your TT you looked up earlier (nav version). Delete the space in the middle and type it in CAPITALS.

Offline Joined: Thu May 20, 2010 4:43 pm Posts: 12980 Has thanked: times Been thanked: times. Tendriver wrote:Make a backup of your current setup by copy & pasting it to your desktop. If you have room on your unit, just run the exe. If you don't have room, remove the old map folder, before you run the exe.

After you run the exe, a.meta.dct file in the map folder confirms that the map is correctly patched. You can use 9.510 SE ttsystem.rar to patch the navcore, if needed. Thanks a lot for your help tendriver! So.after the exe finished the installation.if the.meta.dct is in everything is fine and it works.if it is not in I patch with your suggested software.right? Thanks again! Offline Joined: Tue Dec 11, 2012 3:01 pm Posts: 4 Location: Italy Has thanked: 0 time Been thanked: 0 time. Tendriver wrote:Make a backup of your current setup by copy & pasting it to your desktop.

Now place your sd card in pc or if no sd slot on tomtom connect tomtom via usb to pc, now a box will pop up being that of a drive letter i.e. J:, now double click on the map rar file you downloaded on your desktop and it should look like this on your desktop, keep 2 windows open side by side, now simply drag the map folder over to the sd card or tomtom. Once completed close the rar window, now double click on the Navcore rar file for example mine v8.204 on my desktop, you will get a window like this, simply select all the files inside and drag over the the sd card or tomtom Once done, again close off that rar window, now as you see in my right window the files will now look like this, one Map folder and navcore files surrounding it If you look in the files, there is no TTGO.bif file, this will be created once we restart the tomtom, so turn tomtom off, insert card to tomtom or disconnect usb cable from pc and then power up the tomtom. Once rebooted, you will have to do a few selections to continue in the tomtom. Language English uk, right handed, miles or kilometres, voice etc. Once you confirm this you should now get RED screen stating the words ' You cannot use this map on this device' Now turn off tomtom, connect sd card to pc or the tomtom via usb cable if no sd slot, then turn back on again, the tomtom will now have created a TTGO.Bif file in your tomtom. So now you have successfully installed both Navcore and Maps for the tomtom, now we need to patch them in order for them to work.

8.010 is the officiall for your device so this will work tidy if installed ok,But i reccomend 9.026 Basicpack with SE ttsystem file (See links below) But for a tutorial about some reebooting problems and also please try and use the TomTom Clear Flash tool because maybe your devices flash memory is full and needs emptying (Download it in my sig) [Please or to download file] [Please or to download file]. Hi, I've been looking over these forums and i dont have a clue what i am looking at and how to get the right information for my tomtom one device. I have however managed to find out some information. This is what i found in my ttgo file. [TomTomGo] DeviceName=TomTom ONE DeviceVersionHW=ONE (v8) DeviceSerialNumber=XXXXXXXXXXXX DeviceUniqueID=XXXXX-XXXXX RamDiskVersion=20080328 BootLoaderVersion=55008 LinuxVersion=160868 ApplicationVersionVersionNumber=7502 ApplicationVersion=9215 UserLanguage=English UK UserName= LastConnectionTime=Never GPSFirmwareVersion= CurrentVoiceInfo=Jane CurrentMap=United_Kingdom_and_Republic_of_Ireland CurrentMapVersion=715.1689 if anyone can put me in the right direct as to update my tomtom and maps i would be really grateful.